Hammer crusher manufacturer logo
Contact us
Current Location: Home > Production Line Configuration > Hard Rock >


500T/H granite (with hardness of 5) production line is with ZG1538 feeder, PE1215 jaw crusher , PF1315 impact crusher for secondary crushing and 4YK2460 vibrating screen.

  • Granite Production Line
  • Granite Production Line
  • Granite Production Line
  • Granite Production Line
  • Granite Production Line
  • Granite Production Line
  • Granite Production Line
  • Granite Production Line



As a kind of igneous rock with hard and tight quality, the granite, also called acidic crystalline pluton, is composed of 40%-60% feldspar, 20%-40% quartz, and mica.
With rich reserve and extensive distribution, granite is traditionally used for the construction of buildings, road, and bridge in the folklore as common materials for building and infrastructure construction. It is also applied in chemical industry, metallurgy, thermal power, cement, printing and dyeing, and national defense equipment.
Before actual applied in the production, the exploited granite shall be crushed into small aggregates due to its large size. The configuration of common 500t/h granite production line is detailed as follows.



500T/H Granite production Line: after being blasted from the mountain, the tone less than 1020mm is sent into the vibrating feeder by dumper and then evenly fed into jaw crusher for primary crushing. With the particle size of 150mm-300mm, the stone coming out of the jaw crusher will be conveyed to the impact crusher for secondary crushing and shaping. After being screened and graded by the circular vibrating screen, the block materials with larger size will be returned to the impact crusher for re-crushing while the finished materials are conveyed to the finished product area by the belt conveyor.

    Related Products

    • Hammer Crusher

      Hammer Crusher

      I. Description: By absorbing advanced international technology, Xinxiang Dingli elaborately designs a kind of special primary hammer crusher that can directly ...
    • Sand Maker

      Sand Maker

      Capacity: 40-100t/h Feed Size: 200mm Product introduction : developed by Dingli's experts and on the basis of their years of experience in designing producing mi...
    • ZSJ Dual Rotor Sand Maker

      ZSJ Dual Rotor Sand Maker

      I. Description Capacity: 20-280T/H, high output and low consumption, particle size in line with the size distribution standard of concrete mixing plan, easier ma...
    • Heavy Hammer Crusher

      Heavy Hammer Crusher

      I. Description The heavy hammer crusher developed by Xinxiang Dingli has advanced structure, reliable performance, smooth operation and low energy consumption. T...


    Customer Production Sites

    Service Support