Sand Aggregate IndustryComprehensive Service ProviderSand Aggregate IndustryComprehensive Service ProviderCone Crusher
| model | CH895i |
| Max feed size | 127 mm (5 in.) |
| Capacity(by hour) | 258 - 1,077 mtph (284 - 1,187 stph) |
| Motor power | 750 kW (1,000 hp) |
| Weight | 84,343 kg (185,944 lb) |
*Note: The processing capacity of the CH895i cone crusher may vary with different materials and feeding sizes.
By selecting reasonable equipment model the production line will greatly improve its capacity. The equipment applied for the production of customers is the most suitable through selection and configuration of professional technician.
The DMCA air filter is configured in this production line to collect the powder and improve the whole production environment.
Airplane Construction in Liu Panshui Guizhou chose 300tph aggregates production line. From the picture we get to know it chooses four mineral equipment of PCZ1512 heavy hammer crusher vibrating feeder and two efficient vibrating screens.
CH895i is a technologically advanced, high-capacity cone crusher designed for crushing applications in mines or large sized quarries. Here is the product data:
The nominal capacity of the CH895i crusher is 258 - 1,077 metric tons per hour (284 - 1,187 short tons per hour). This allows it to handle a considerable amount of material, making it suitable for various production requirements in mining and quarrying operations.
The maximum feed size is 127 mm (5 in.), enabling the crusher to process relatively large pieces of raw material efficiently, reducing the need for excessive pre-treatment of the feedstock.
The crusher is equipped with a 750 kW (1,000 hp) motor, providing the necessary power for continuous and stable operation. This ensures that the crusher can effectively break down the material it processes.
The Closed Side Setting (CSS) range is 10 - 70 mm (0 - 3 in.). This range allows for adjustment to achieve the desired product size, depending on the requirements of the final product.
The Eccentric Throw range is 24 - 70 mm (1 - 3 in.). The proper eccentric throw is crucial for efficient crushing, helping to optimize the crushing process and improve the quality of the crushed product.
The Mantles (inner liners) available are EF, OB, and HC*. Note that HC is used only with HR.
The Concaves (outer liners) include EFX, EF, EEF, and HR**. It should be noted that HR is only available through aftermarket.
The number of chambers is 4. The design of the chambers plays an important role in the crushing process, affecting the overall efficiency and quality of the crushing operation.
The weight of the CH895i crusher is 84,343 kg (185,944 lb). This weight contributes to the stability and robustness of the equipment, while also considering factors such as transportation and installation.
The crusher includes Automation (ACS), which helps to optimize the crushing process by adjusting to different feed conditions, enhancing the overall performance and efficiency of the crusher.
The Electric Dump Valve is included, providing additional functionality and protection for the crusher during operation.
The Lubrication Tank is included, ensuring proper lubrication of the moving parts, which is essential for the long-term and reliable operation of the crusher.
The Tank Instrument Monitoring System is included, allowing for real-time monitoring of the lubrication system, which helps in maintaining optimal operating conditions and preventing potential failures.
The Offline Lubrication Filtration Unit is included, helping to keep the lubricant clean and free from contaminants, thus extending the life of the equipment.
The crusher comes with several different crushing chambers as standard. By selecting the right crushing chamber and eccentric throw, the crusher can easily adapt to changes in production requirements. The available crushing chambers are:
EF = Extra fine
EFX = Extra fine xtra
EEF = Extra extra fine
HR = High reduction
We are present worldwide and always here to help.
Get in touch today!
