Sand Aggregate IndustryComprehensive Service ProviderSand Aggregate IndustryComprehensive Service Provider
| Parameter Category | Specification Value | ||||
|---|---|---|---|---|---|
| model | HPT100 | ||||
| Cavity type | C1 | C2 | M | F1 | F2 |
| Max feed size (mm) | 140 | 100 | 70 | 50 | 20 |
| Minimum Discharge Opening (mm) | 19 | 13 | 9 | 9 | 6 |
| Capacity (tph) | 75 - 140 | 60 - 110 | 52 - 100 | 50 - 95 | 45 - 90 |
| Power (kw) | 90 | ||||
| Overall dimensions (mm) | 1705 × 1510 × 1583 | ||||
The C1 chamber of HPT100 multi cylinder cone crusher meets the production demand of 120 tons per hour. The feed particle size should be less than 140 millimeters, and the discharge particle size should not exceed 19 millimeters, which belongs to medium crushing processing. Specially designed for crushing medium hard rocks, it can efficiently crush materials such as basalt and granite with good discharge. According to its discharge particle type, a fine crusher is also required for fine crushing processing to obtain building sand and gravel aggregates that meet the specifications. To crush low hardness stones such as limestone, corresponding capacity hammer crushers or impact crushers can be selected for crushing and processing, which can reduce equipment and energy consumption costs. The specific equipment model selection can be configured in detail according to the production site and the requirements of the crushed materials.
Free consultation on related issues.
