Sand Aggregate IndustryComprehensive Service ProviderSand Aggregate IndustryComprehensive Service ProviderCone Crusher
| model | PYZ1200 |
| Max feed size | 100 mm |
| CSS Range | 8 - 25 mm |
| Capacity(by hour) | 42 - 135 t/h |
| Motor power | 110 kW |
| Dimensions | 2790×1878×2844 mm |
| Weight | 25 t |
*Note: The processing capacity of the PYZ1200 cone crusher may vary with different materials and feeding sizes.
It is seen this production line adopts centralized construction by using the dry sand making equipment of Zhongyu Dingli. In the sign board on the production site it clearly indicates the components of the equipment and operation process.
The technician is conducting the commissioning of all the associated equipment which greatly reduces the possibility of failure in the future operation and improve follow-up production efficiency.
The above pictures show the installation site of the cement production line in Saima Ningxia.
The stable operation of the PYZ1200Z spring cone crusher is crucial for production efficiency and product quality. Proper maintenance can extend its service life and reduce the probability of malfunctions. Here are the simplified maintenance points.
Clean the PYZ1200Z spring cone crusher daily to remove surface dust and debris, especially at the feed inlet and discharge outlet. Check whether the belt is loose or worn, whether the connecting bolts are tightened, whether the springs are deformed or broken. Also, check the oil level and quality in the thin oil station to ensure that the oil pipes have no leaks and the equipment is properly lubricated.
Re - tighten the components every week, focusing on the parts that are likely to loosen during operation. Check the wear of transmission components such as the drive shaft and bearings, and handle problems promptly when found. Check the wear of vulnerable parts such as the crushing wall, mantle, and liner every month. Replace them immediately when the wear exceeds the limit. At the same time, check the electrical wiring and motor insulation, and clean the dust in the control cabinet. Lubricate all lubrication points comprehensively every quarter, and test performance indicators such as the processing capacity and discharge particle size of the equipment to ensure the stable performance of the PYZ1200Z spring cone crusher.
Before a long - term shutdown, clean the materials inside the equipment, add grease to all lubrication points, cut off the power supply, and cover the equipment. After a fault is repaired, before re - using, check the repaired parts and related components, and conduct a comprehensive maintenance of the equipment to ensure the normal operation of the PYZ1200Z spring cone crusher.
We are present worldwide and always here to help.
Get in touch today!
