PE800×1060

PE 800×1060 Jaw Crusher

Jaw crushers are indispensable for primary crushing in various crushing, sand-making, grinding, and mineral processing lines. The PE 800×1060 jaw crusher stands out due to its strong production capacity, wide applicability, and excellent crushing performance. This model is suitable for processing a variety of ores with compressive strengths not exceeding 320 MPa, such as granite, limestone, river pebbles, etc. Below are the technical parameters of the PE 800×1060 jaw crusher:

Technical Parameters:

• Feed Opening Size (mm): 800×1060
• Maximum Feed Size (mm): 640
• Discharge Opening Adjustment Range (mm): 130-190
• Capacity (t/h): 130-330
• Eccentric Shaft Speed (r/min): 250
• Motor Power (kw): 8P 110
• Dimensions (L×W×H) (mm): 2710×2430×2800
• Total Weight (t): 29.8

Advantages:

• Long Service Life: High-quality steel welded frame effectively reduces casting defects, ensuring more stable operation and extending the service life by approximately 2.5 times.
• Adjustable Discharge Size: A new gasket discharge adjustment design allows for a wide range of adjustments and easy operation.
• High Crushing Ratio: The deep crushing cavity increases the material holding capacity, enhancing production efficiency.
• Stable Operation: Unique flywheel design minimizes vibrations and noise, providing smoother operation and enhanced continuity.
• Energy-Efficient and Environmentally Friendly: Reduces energy consumption by 45%, and operates with minimal dust emissions, meeting environmental standards.

Working Principle:The working parts of a jaw crusher consist of two jaws, one fixed jaw (stationary jaw) and one movable jaw (toggle jaw). The fixed jaw is vertically mounted on the front wall of the frame, while the movable jaw is positioned at an angle. The movable jaw performs periodic reciprocating motions relative to the fixed jaw. When they separate, material enters the crushing cavity; when they come together, the material is crushed through compression, bending, and splitting.