HCC36D

Parameter Analysis of HCC36D Cone Crusher: Multi - Chamber Design Meets Fine Crushing Requirements

Keywords: HCC36D cone crusher; multi - chamber crusher; crusher processing capacity; ore processing equipment; cone crusher parameter comparison

In the mine crushing process, the chamber configuration of the equipment directly affects production efficiency and finished product quality. The HCC36D cone crusher provides precise solutions for materials of different hardness and crushing stages with its innovative three - chamber design. The following analyzes its core advantages from the perspectives of technical parameters and scenario adaptation.

Breakthrough in Multi - Chamber Technology

The HCC36D offers three chamber configurations: Fine, Medium, and Extra Coarse. The modular design enables quick switching:

Fine: Maximum feed size is 35mm, finished product size is 3 - 13mm, and production capacity is 28 - 93t/h. It is suitable for fine processing of sand and gravel aggregates.

Medium: The feed size is extended to 65mm, the finished product size is 5 - 16mm, and the production capacity is increased to 37 - 103t/h. It balances efficiency and finished product rate.

Extra Coarse: It can process large materials up to 85mm, the finished product size is 6 - 19mm, and the maximum production capacity reaches 133t/h. It is used for high - intensity primary crushing.

(Note: Highlight the flexibility of chamber selection through comparative data)

High - Efficiency and Energy - Saving Design

Power optimization: All models are standard - equipped with a 75kW motor, and the power - density ratio is 12% higher than the industry standard.

Compact structure: The total weight of the machine is 14.7 tons, and the dimensions are 2656×1746×2241mm, which is convenient for deployment in mobile production lines.

Energy consumption comparison: The unit energy consumption is as low as 0.56 - 0.81kWh/ton (calculated based on the maximum production capacity), which is 15% more energy - efficient than similar equipment.

Scenario Adaptation Guide

For the fine preparation of manufactured sand, the recommended chamber type is Fine. A typical case is the production of 0 - 5mm finished products in a granite sand - making plant.

When it comes to the processing of mixed materials, the Medium chamber is recommended. A representative example is the recycled aggregate production line for construction waste.

In the case of primary hard - rock crushing, the Extra Coarse chamber should be chosen. A typical scenario is the primary crushing section in an iron ore concentrator.

Key Points for Selection Decision - Making

Feed particle size control: The Extra Coarse chamber can process materials ≤85mm, avoiding excessive crushing in the front - end jaw crusher.

Production capacity matching: The maximum processing capacity of 133t/h is suitable for medium - sized production lines of 200 - 500t/h.

Maintenance cost: The unified power and size design reduces the inventory pressure of spare parts.