Sand Aggregate IndustryComprehensive Service ProviderSand Aggregate IndustryComprehensive Service ProviderJaw crusher
| model | JC759 |
| Feed opening | 1300×1500 mm |
| Max feed size | ≤1000 mm |
| CSS Range | 150-300 mm |
| Capacity(by hour) | 480-1645 tph |
| Motor power | 200-220 KW |
*Note: The processing capacity of the JC759 jaw crusher may vary with different materials and feeding sizes.
It’s seen the crusher is installed below the silo; the aggregates are fed into the crusher in a convenient and efficient manner. The corresponding motor equipped ensures equipment to operate according to rated power with low consumption.
This is a crushing production line established by cement industry that can crush not only limestone but clay and gypsum with high efficiency full crushing and lower wear-resistance.
In this production line we firstly crushed the huge materials into smaller ones by crusher and then crushed into smaller finished stones by second crushing; lastly we need a sand maker to produce quality sand.
Capacity(by hour)：480-1645 tph
Motor power：200-220 kW
| Crusher throughput capacity,scalped feed material | Crusher throughput capacity,Non-scalped feed material | |
|---|---|---|
| Dischaging Size (mm) | Capacity (t/h) | |
| 150 | 480-550 | 545-735 |
| 175 | 545-625 | 635-840 |
| 200 | 610-700 | 755-1035 |
| 225 | 675-775 | 860-1195 |
| 250 | 745-855 | 985-1350 |
| 275 | 820-945 | 1110-1495 |
| 300 | 885-1015 | 1235-1645 |
We are present worldwide and always here to help.
Get in touch today!
